Airgun Designs - 68 Automag - Level 10 - Foamie Bolt

Bolts from AGD are made from hardened stainless for extra long life. They come in two types:1. Foamieless (shown here) - all stainless construction including the tip that pushes on the paintball. Get this one if you don't want to fool around with...

Airgun Designs - 68 Automag - Power Tube Spacer Kit

Power Tube Spacer Kit - The Spacer Kit gives you five different brass spacers, all legibly numbered so you can adjust the spacing of the power tube O-ring. If your marker has bolt stick, use a longer one; if it leaks down the barrel, use a shorter one...

Smart Parts - Automag - Tourney Lock - Grey Splash - Used

8/10 condition

Smart Parts - Automag - Tourney Lock - Camo Splash

Smart Parts - Automag - Power Feed Plug - Camo Splash

Smart Parts - Automag - Power Feed Plug - Blue Splash

Smart Parts - Automag - Power Feed Plug - Grey Splash

Airgun Designs - 68 Automag - Grip Frame w/Grips

Used but 9/10 condition. Fitted with factory grips. NO trigger or safety!

National Paintballl Supply - Double Trigger for Airgun Designs 68 Automag - BLACK

National Paintballl Supply - Double Trigger for Airgun Designs 68 Automag - BLACK

Airgun Designs - 68 Automag - Smart Parts double Trigger - Silver

Smart Parts Double Trigger for Airgun Designs 68 Automag - SILVER

Airgun Designs - 68 Automag - Smart Parts double Trigger - Black

Smart Parts Double Trigger for Airgun Designs 68 Automag - BLACK

Airgun Designs - 68 Automag - Electronic Hyperframe safety button

Centerflag Products Electronic Hyperframe safety button

Airgun Designs - 68 Automag - Electronic Hyperframe on/off Assembly

Centerflag Products Electronic Hyperframe on/off Assembly

Airgun Designs - 68 Automag - FN Bolt Spring

This is the strongest and longest spring and is uncut. Get this if you want to cut down the spring yourself for maximum Level 10 effect. This will push the level 10 effect to the limit at a significant efficiency loss. This spring is only available on...

Airgun Designs - 68 Automag - L10 Bolt Spring

This is a heaver and longer spring than the Gold spring for the level 10. The red spring will produce a much stronger Level 10 effect causing the bolt to decelerate even faster during a breach "incident". This spring allows the use of even more brittle...

Airgun Designs - 68 Automag - SS Tournament lock

Automag Stainless Steel Tournament Lock

Airgun Designs - 68 Automag - On/Off Pin - AM/MM

The On/Off Pin controls air flow in your marker. It is a critical precision component and should not be modified. Hardened and chrome plated for extra long life.

Airgun Designs - 68 Automag - Regulator Piston Assembly - Retro/RT

The Regulator Piston comes as an assembly that has a built in blow-off valve. Do not disassemble! Replace this part when air is venting out the back of the marker and you are shooting less than 300 FPS.This part has been set to the stock higher pressure...

Airgun Designs - 68 Automag - AM/MM Sear Pin

The sear has this special hardened steel axle that it rotates on. For Automags, Minimags and Classics, unless using the Tac rail - then the Emag/RT/RT Pro Sear Axle Pin is required.

Airgun Designs - 68 Automag - Regulator Valve Pin and Spring

This part works in conjunction with the Regulator Seat to control the air pressure in the chamber. It is not normally a wear part and should last a lifetime. Keep it clean.

Airgun Designs - 68 Automag - Power Tube Tip Assembly

This item screws into the end of the Power Tube and is a precision part. It releases the air blast behind the ball in a controlled manner so the air hits the ball with low pressure to gently accelerate it out the barrel. Use a coin to tighten it up.

Airgun Designs - 68 Automag - Regulator Piston Assembly

The Regulator Piston comes as an assembly. DO NOT take this apart. It has a built in blow-off valve that will leak air if your marker becomes over pressurized. The blow-off resets once your pressure goes back to normal. This safety feature is found...

Airgun Designs - 68 Automag - Regulator Seat - 1 (One)

The Regulator Seat is the most abused part of the marker. It opens and closes with every shot and every piece of dirt in your air system eventually goes through it. To fix most velocity problems the first place to start is the Reg Seat. Keep it clean!...

Airgun Designs - 68 Automag - AM/MM Sear Assembly

Sear Assembly includes everything you see here. Fits Automag, Minimag and Classic rails. Does NOT fit the Tac rail, which needs the RT Pro Sear Assembly.

Airgun Designs - 68 Automag - Bolt Spring

The Bolt Spring is used with all level 7 bolt types on all AGD markers regardless of age or type. They are made from very special square wire so they don't fold inside themselves when collapsed. This spring is also the standard set-up with the Level 10...

Airgun Designs - 68 Automag - Plastic Nubbin - 4 Pack

Nubbins are a simple device that prevents double ball feeding when using most brands of paintballs. Nubbins are used with twist lock barrels and install easily in the machines track designed to hold them. A fresh barrel oring is a good idea to hold them...

Airgun Designs - 68 Automag - Wire Nubbin

Nubbins are a simple device that prevents double ball feeding when using most brands of paintballs. Nubbins are used with twist lock barrels and install easily in the machines track designed to hold them. A fresh barrel oring is a good idea to hold them...

Airgun Designs - 68 Automag - Level 7A Bolt - Foamieless

Bolts from AGD are made from hardened stainless for extra long life. They come in two types:1. Foamieless (shown here) - all stainless construction including the tip that pushes on the paintball. Get this one if you don't want to fool around with...

Airgun Designs - 68 Automag - Sight Rail - Purple Gold

OEM Smart Parts, machined for lighter weight.

Airgun Designs - 68 Automag - Sight Rail - Silver

OEM

Airgun Designs - 68 Automag - Field Strip Screw Assembly

The Field Strip Screw holds your valve in place. Comes with a small urethane rubber washer (#000199)on the base to prevent it from vibrating out. Make sure you tighten it with a wrench just past finger tight. Works for all AGD markers except the Classic...

Airgun Designs - 68 Automag - Powerfeed Plug (Short)

Parabolic Power Feed Plug is the standard part that comes with the Automag. Replaces original plug and improves feed rates.

Airgun Designs - 68 Automag - Sight Rail - SP Camo

OEM Smart Parts, machined for a Magic Box.

Airgun Designs - 68 Automag - Sight Rail - Smart Parts Purple Splash

OEM