Inception Designs - Cocking Rod Black

Product Description

This cocking rod can be easily adjusted for length by the threaded rear knob, can be locked down to prevent it slipping via the set screw in the rear (which can also be used to tighten the rod into your hammer) and can be used for all full body (guns with back blocks) Autocockers and Snipers.

Comes with a stainless steel shaft, bumper, polished black cocking knob and stainless steel locking set screw.

We recommend the use of the nylon locking set screws (available separately) when using the cocking rod with our universal hammer (also available separately).

We recommend installing the end piece onto the shaft with blue loctite (or similar), and the set screw into the rear of the end piece with blue loctite (or similar).

If you need to further lengthen or shorten the cocking rod in an Inception hammer we recommend the use of our "Back Block and Mid Block locking screws" screw set available separately.